The cargo management rails that our truck bed bike rack selection guide is referring to are side-rails that are installed on the inside of the truck bed frame rails. With these internal side rails installed you can add cross bars which will then give you two layers of cargo carrying ability. These rails are typically dealer installed and are not offered with all makes and models of trucks. I could not find where Toyota has these rails however this is an option on Ford trucks and Nissan... view full answer...
I see you got the RockyMounts LoBall Bike Rack for Truck Bed # RKY1097. We do not have a kayak or surfboard carrier that mounts in the truck bed like the RockyMounts.
If you are not installing a roof rack to carry the kayak or surfboard we do have a way to carry them in the bed of your truck. We carry tailgate pads like part # SR26457 for full-size and part # S64761 for mid-size trucks. These are pads that are attached to the tailgate and you then carry the board or kayak as shown in the... view full answer...
Yes, the RockyMounts Truck Bed Track for Fork Mount Bike Racks, # RKY10993 will work with your 2022 Honda Ridgeline with a bed liner. It is not compatible with the RetraxONE MX retractable, # RT60502. view full answer...
According to my contact at Swagman their Pick-Up Truck-Bed-Mounted 2 Bike Carrier # S64702 will require you to install the two fork block assemblies using the included hardware and Allen key but otherwise this 2-bike carrier comes fully assembled. Installation is quick and easy as shown in the linked video. view full answer...
For the Thule Insta-Gater Pro truck bike rack # TH93VR an accessory lock is integrated to allow locking the loaded bike to the rack but this does not secure the rack itself as you noted. To do this I recommend a cost-effective cable lock such as # e98891 that can be routed through the rack tubing and to your truck's tie downs.
You could also use one cable lock to secure the bike to the Insta-Gater, if you prefer not to use Thule's own lock core, and another to secure the rack to the truck's... view full answer...
Any exterior vehicle feature, whether a roof rack or ladder rack or bike or cargo carrier that can catch wind has the potential to also generate noise. This noise is commonly a whistling-type sound as you noted.
Often the objects that are mounted to the roof rack or ladder rack, say two roof-mount bike carriers and bikes on a roof rack or a ladder and some lumber on a pickup truck ladder rack, can actually make more noise than the rack itself. There are many variables in play when it comes... view full answer...
The Swagman Patrol trunk mount bike rack, part # S64701 already comes with a locking skewer. To accommodate your Boost Axles, you'll need the # S64719 adapter. All you'll need to do is to replace the existing 15mm adapter with the # S64719 adapter and you'll be good to go. view full answer...
I have a great ladder rack option for your 2022 GMC Sierra 2500 with standard bed and no cover. The Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501150 is a great option for a work truck. This ladder rack is an over-the-cab ladder rack with removable rear crossbar that lets you carry ladders and lumber on the rack while hauling appliances and furniture in your truck bed. It also features raised side rails that provide load support for your cargo and multiple cutouts that can... view full answer...
The Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise # RM-077-10 is not Class 3 rated because only hitches are rated by class as opposed to any adapter. And for question two, actual weight is pretty irrelevant in all honesty; Roadmaster's engineers have determined the # RM-077-10 is able to withstand the very fluid ride of a flat towed vehicle and its smooth suspension but not the extremely rough, bouncing, constant motion of a trailer and its very basic suspension. view full answer...
Just a pair of the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights # Y01151 are not available, so you do need to get all four of the uprights.
I have added a link to a video review for you to check out as well of the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights # Y01151. view full answer...
The max height adjustment of the Thule Xsporter Pro Truck Bed Ladder Rack # TH500XTB is approximately 30" and you're correct that the minimum height would be 30" minus the length of the bed rails. view full answer...
I checked with the manufacturer, Adarac, and verified that for your 2022 Ram 1500, the crossbars of the Adarac Pro Series rack are 24 inches above your bed rails. And regarding the difference between the two, it is simply the size of the bed they fit on a '22 Ram 1500:
- 6-1/2 Foot Bed : Adarac Pro Series Custom Truck Bed Ladder Rack # A42WG
- 5-1/2 Foot Bed : Adarac Pro Series Custom Truck Bed Ladder Rack # A35WG
So you'll want to choose the right one for your truck's bed size, and... view full answer...
The T-Rac Pro2 Truck Bed Ladder Rack for Full-Size Pickups, # TH37002XT does not have a lock available. However, the Thule TracRac SR Sliding Truck Bed Ladder Rack, # TH43002XT-000 does have the option of using the Locking TracKnobs for Thule TracRac G2 or SR Sliding Ladder Rack, # TH25700. These TracKnobs replace the standard, quick-release knobs. When locked the top of knob spins freely, but once unlocked the cylinder engages so that you can turn the knob to disengage the thread. view full answer...
The Yakima SideBar Rails cannot be cut as the assembly does in fact involve one bar sliding into the other like you mentioned and it would not be structurally sound, but there is a short bed version of these rails, which is the SideBar Rails for Yakima OverHaul HD and Outpost HD Truck Bed Racks - Short Bed # Y01153.
These rails have a crossbar spread that is adjustable from 36 inches to 64 inches for short bed trucks.
I have added a link below to a video review for you to take a look... view full answer...
The Replacement Stake Pocket Insert for Adarac Custom Truck Bed Ladder Rack part # A70432 uses a 3/8" x 1-1/2" hex bolt per the instructions. view full answer...
Though there isn't a mesh available there is absolutely an air deflector for the Buyers Products Over-The-Cab Truck Bed Ladder Rack - Aluminum # 3371501400 or Black # 3371501410.
The Wind Deflector Kit for Buyers Products Truck Bed Ladder Rack # 3371501193 will ensure you have a quieter ride in your 2017 Chevy Silverado. I have added links to video reviews of both the rack and wind deflector for you to check out. view full answer...
The construction of the Erickson Over-The-Cab Truck Bed Ladder Rack, part # EM07707 uses the back rail to make the ladder rack stable and is not a removable part. I confirmed this with my contact at Erickson.
You may be able to place something between the back rail and the forward rail if it happens to be taller than the ladder rack which is 32-7/6 inches tall. view full answer...
The Replacement Modular Upright for TracRac TracONE Truck Bed Ladder Rack part # 8523446001 that you referenced is a genuine Thule part which means it is made by the same company who made the ladder rack. We also have tons of other genuine parts which I have attached a few of for you below. Please let me know if you need something that you do not see.
Replacement Crossbar for TracRac Ladder Racks part # TAFX-30007-02
Replacement Modular Base for TracRac Fixed Mount Ladder Rack (Left Front/Right... view full answer...
Go To Results